Automobile Engineering

Home / Research & Consultancy

RIT AUTO RF 01

RIT AUTO RF 02

RIT AUTO RF 03

RIT AUTO RF 04

Sr. No. Name of Test Facility Specifications Measuring Parameters Testing Capacity
1
Engine Dynamometers Dynamometer
a) Hydraulic Dynamometer : Power rating : 169 hp @ 3600 - 7500 rpm

b) Eddy Current Dynamometer : Power Rating up-to 40 hp @ 4000- 10000 rpm

c) Eddy Current Dynamometer : Power Rating up-to 10 - 15 hp up to 10000 rpm

d) Eddy Current Dynamometer : Power Rating up-to 20 kW @ 2450 - 10000 rpm
Engine Brake Power, Torque,
Specific Fuel Consumption,
Air Consumption, Mechanical Efficiency, Thermal Efficiency, Friction Power, Indicated Power
Diesel Engine Performance, Petrol Engine Performance, Gear box Performance, Clutch Performance, Fluid Coupling Performance ,
2
Electronic Gravimetric Fuel Measurement system High speed & high accuracy load cell signal conditioning board, Digital timer display up to 4 digits, Overall accuracy ± 0.3 % (1500 gm), Microcontroller based RS232 Interface with computer interfacing along with software Fuel flow Measurement Three modes of operation
1. Time base
2. Quantity base
3. Revolution base
3
Hand held Smart Manometer with Air Box (Air Consumption Measurement Unit) Manometer with air-box, Airbox size 450 X 900 mm Differential pressure transmitter/transducer Portable handheld smart manometer with 9 V battery Airbox with three interchangeable orifice plates of different sizes Airflow measurement Diesel Engines, Petrol Engines,
4
Combustion Analyzer DEWE-RACK-4
DEWE-BOX-CA-EDUC
CA-OPT1
CA-ANGLE-SENSOR-0.2
CA-OPT3
On-line graphical display to measure
1. Crank angle based pressure diagram
2. Integrated pressure signal
3. Pressure / Volume diagram
4. Calculated heating process
5. On-line knocking recognition
6. Mathematics Setting 7. Statistical Display 8. Data storing & data export to ASCII (Also Excel)
5
Decelerometer GPS SENSOR 5Hz Built in 5Hz GPS receiver Digital accelerometers Compact flash memory Lap beacon input Serial input for ECU/OBDII data CORRSYS CDS DFL FLOWMETER 1. Brake Efficiency of vehicle (Deceleration) 2. Acceleration & Fuel Consumption measurement
3. Coast-down trial
4. Maximum speed test
5. Speedometer calibration
6. Odometer calibration
6
Data Acquisition System IMC German made data acquisition system, CRONOS-PL-2 CRPL-2, Personal Analyzer-Online FAMOS CRPL/OFA, Amplifiers, 3 8-channel all-purpose amplifiers (350Ohm) Measurement of
a) Temperature b) Pressure c) Fluid flow d) Torque e) Speed f) Strain g) Acceleration
7
Two Wheeler Chassis Dynamometer Braked Type Chassis Dynamometer, Make - ATE, Maxi. 100 h.p. at 3000 / 6000 rpm Volumetric Fuel consumption Measurement Unit Vehicle Performance Tests -
1) Normal Mode Test (Performance Test)
2) Acceleration Test
3) Braking Test
4) Average Test
Plotting Performance Characteristics Curves-
a. Vehicle speed v/s h.p. in different gears
b. Vehicle speed v/s torques in different gears
c. Vehicle speed v/s tractive effort
8
Eddy Current Dynamometer Make: SAJ
Power rating : 80 kW @ 4800 - 9000 rpm
Engine Brake Power, Torque, Specific Fuel Consumption, Air Consumption, Mechanical Efficiency, Thermal Efficiency, Friction Power, Indicated Power
9
Software - ITI Simulation X
  • Engineering mechanics & control, power transmission / Electrical & Electronics
  • Library details - mechanics 1D linear, Mechanics 1D rotary, mechanics 3D, CAD Import via STL, Motors & Engines,
  • Coupling/clutches transmission components, general signal blocks,
  • Magnets, electronic analog, electronics (Spice Elements), Spice net list import, electrical motors
Capability to simulate Mechanical 1D, 3D, Thermal, Fluid systems for design, optimization & analysis
10
Exhaust Gas Analyzer Tecalmint T.D.2040 Exhaust Emission Measurement of CO & HC (Petrol Engine)
11
Microprocessor Based 4 Gas Auto. Exhaust Analyzer CO : 0-9.9 % resolution 0.1%
HC : 0-9990 ppm
Resolution 10 ppm CO2 : 0 - 19.9 Resolution 0.1 % O2 : 0 - 25 % Resolution 0.1 %
Response time: 10 second
Warm up time: 20 min.
Power Supply : 230 v AC
Exhaust Emission Measurement of
CO
HC
CO2
O2
(Petrol Engine)
12
CO/HC Gas Analyzer CO : 0-9.9 % resolution 0.1%
HC : 0-9990 ppm
Resolution 10 ppm
Response time : 10 second
Warm up time : 20 min.
Power Supply: 230 v AC
Exhaust Emission Measurement of Petrol engines
CO
HC
(Petrol Engine)
13
Smoke Meter Display indication : light absorption coefficient (k) /% Opacity Warm up time : 15 min. Power requirement : 230 V Display range : 0-9.9 per meter Exhaust Emission Measurement of Diesel engines
Smoke
(Diesel Engine)
14
Engine Scanner Computer controlled system engine analyzer with diesel interface, 80-column printer Engine diagnostics tool (Petrol Engine)
15
KAL Equipment A/F ratio 8: 1 to 16: 1(Gasoline)
A/F ratio 12: 1 to 16: 1 (Liquid Gas)
Air / Fuel ratio measurement & CO measurement (Petrol Engine)